Periodic transmission peak splitting in one dimensional disordered photonic structures

In the present paper we present ways to modulate the periodic transmission peaks arising in disordered one dimensional photonic structures with hundreds of layers. Disordered structures in which the optical length nd (n is the refractive index and d the layer thickness) is the same for each layer show regular peaks in their transmission spectra. A proper variation of the optical length of the layers leads to a splitting of the transmission peaks. Notably, the variation of the occurrence of high and low refractive index layers, gives a tool to tune also the width of the peaks. These results are of highest interest for optical application, such as light filtering, where the manifold of parameters allows a precise design of the spectral transmission ranges.Comment: 5 pages, 3 figure

Photo-thermal effect with photonic crystals for photocatalysis and water desalination

The demand of water is absolutely important for irrigation, industrial processes and domestic use. An interesting strategy to cope with the increasing water need is water desalination, which can be pursued with several strategies. Usually, the energy requirement of desalination plants is rather high. Membrane distillation is a good alternative, but it requires a non negligible amount of energy to heat the input water. Photothermal effects that exploit photonic structures can overcome this problem. In this review, we report significant works that employ photonic devices for water desalination. Moreover, we envisage the use of low-cost and easy-to-design one-dimensional photonic crystals and random photonic structures as photothermal devices

Black Phosphorus based One-dimensional Photonic Crystals and Microcavities

The latest achievements in the fabrication of black phosphorus thin layers, towards the technological breakthrough of a phosphorene atomically thin layer, are paving the way for a their employment in electronics, optics, and optoelectronics. In this work, we have simulated the optical properties of one-dimensional photonic structures, i.e. photonic crystals and microcavities, in which few-layer black phosphorus is one of the components. The insertion of the 5 nm black phosphorous layers leads to a photonic band gap in the photonic crystals and a cavity mode in the microcavity interesting for light manipulation and emission enhancement.Comment: 7 pages, 4 figure

Tuning and Locking the Localized Surface Plasmon Resonances of CuS (Covellite) Nanocrystals by an Amorphous CuPdxS Shell

[Image: see text] We demonstrate the stabilization of the localized surface plasmon resonance (LSPR) in a semiconductor-based core–shell heterostructure made of a plasmonic CuS core embedded in an amorphous-like alloyed CuPd(x)S shell. This heterostructure is prepared by reacting the as-synthesized CuS nanocrystals (NCs) with Pd(2+) cations at room temperature in the presence of an electron donor (ascorbic acid). The reaction starts from the surface of the CuS NCs and proceeds toward the center, causing reorganization of the initial lattice and amorphization of the covellite structure. According to density functional calculations, Pd atoms are preferentially accommodated between the bilayer formed by the S–S covalent bonds, which are therefore broken, and this can be understood as the first step leading to amorphization of the particles upon insertion of the Pd(2+) ions. The position and intensity in near-infrared LSPRs can be tuned by altering the thickness of the shell and are in agreement with the theoretical optical simulation based on the Mie–Gans theory and Drude model. Compared to the starting CuS NCs, the amorphous CuPd(x)S shell in the core–shell nanoparticles makes their plasmonic response less sensitive to a harsh oxidation environment (generated, for example, by the presence of I(2))

Colloidal CuFeS2 Nanocrystals: Intermediate Fe d-Band Leads to High Photothermal Conversion Efficiency

We describe the colloidal hot-injection synthesis of phase-pure nanocrystals (NCs) of a highly abundant mineral, chalcopyrite (CuFeS2). Absorption bands centered at around 480 and 950 nm, spanning almost the entire visible and near infrared regions, encompass their optical extinction characteristics. These peaks are ascribable to electronic transitions from the valence band (VB) to the empty intermediate band (IB), located in the fundamental gap and mainly composed of Fe 3d orbitals. Laser-irradiation (at 808 nm) of an aqueous suspension of CuFeS2 NCs exhibited significant heating, with a photothermal conversion efficiency of 49%. Such efficient heating is ascribable to the carrier relaxation within the broad IB band (owing to the indirect VB-IB gap), as corroborated by transient absorption measurements. The intense absorption and high photothermal transduction efficiency (PTE) of these NCs in the so-called biological window (650-900 nm) makes them suitable for photothermal therapy as demonstrated by tumor cell annihilation upon laser irradiation. The otherwise harmless nature of these NCs in dark conditions was confirmed by in vitro toxicity tests on two different cell lines. The presence of the deep Fe levels constituting the IB is the origin of such enhanced PTE, which can be used to design other high performing NC photothermal agents.Comment: 12 pages, Chemistry of Materials, 31-May-201

Large scale indium tin oxide (ITO) one dimensional gratings for ultrafast signal modulation in the visible spectral region

Indium tin oxide (ITO) is a heavily doped semiconductor with a plasmonic response in the near infrared region. When exposed to light, the distribution of conduction band electron induces a change in the real and imaginary parts of the dielectric permittivity. The coupling of the electromagnetic waves with the electrons in the conduction band of metallic nanostructures with ultrashort light pulses results in a nonlinear plasmonic response. Such optical modulation occurring on ultrafast time scales, e.g. picosecond response times, can be exploited and used to create integrated optical components with terahertz modulation speed. Here, we present a photophysical study on a one dimensional ITO grating, realized using a femtosecond micromachining process, a very industrially accessible technology. The geometries, dimensions and pitch of the various gratings analyzed are obtained by means of direct ablation in a controlled atmosphere of a homogeneous thin layer of ITO deposited on a glass substrate. The pitch has been selected in order to obtain a higher order of the photonic band gap in the visible spectral region. Femtosecond micromachining technology guarantees precision, repeatability and extreme manufacturing flexibility. By means of ultrafast pump-probe spectroscopy, we characterize both the plasmon and inter-band temporal dynamics. We observe a large optical nonlinearity of the ITO grating in the visible range, where the photonic band gap occurs, when pumped at the surface plasmon resonance in the near infrared (1500 nm) region. All together, we show the possibility of all-optical signal modulation with heavily doped semiconductors in their transparency window with a picosecond response time through the formation of ITO grating structures

Electro-responsivity in electrolyte-free and solution processed Bragg stacks

Achieving an active manipulation of colours has huge implications in optoelectronics, as colour engineering can be exploited in a number of applications, ranging from display to lightning. In the last decade, the synergy of the highly pure colours of 1D photonic crystals, also known as Bragg stacks, with electro-tunable materials have been proposed as an interesting route to attain such a technologically relevant effect. However, recent works rely on the use of liquid electrolytes, which can pose issues in terms of chemical and environmental stability. Here, we report on the proof-of-concept of an electrolyte free and solution-processed electro-responsive Bragg stack. We integrate an electro-responsive plasmonic metal oxide, namely indium tin oxide, in a 1D photonic crystal structure made of alternating layers of ITO and TiO2 nanoparticles. In such a device, we observed a maximum of 23 nm blue-shift upon the application of an external bias (10 V). Our data suggest that electrochromism can be attained in all-solid state systems by combining a judicious selection of the constituent materials with device architecture optimisation. This journal i

Numerical Study of the Optical Response of ITO-In2O3 Core-Shell Nanocrystals for Multispectral Electromagnetic Shielding

Nowadays materials to protect equipment from unwanted multispectral electromagnetic waves are needed in a broad range of applications including electronics, medical, military and aerospace. However, the shielding materials currently in use are bulky and work effectively only in a limited frequency range. Therefore, nanostructured materials are under investigation by the relevant scientific community. In this framework, the design of multispectral shielding nanomaterials must be supplemented with proper numerical models that allow dealing with non-linearities and being effective in predicting their absorption spectra. In this study, the electromagnetic response of metal-oxide nanocrystals with multispectral electromagnetic shielding capability has been investigated. A numerical framework was developed to predict energy bands and electron density profiles of a core-shell nanocrystal and to evaluate its optical response at different wavelengths. To this aim, a finite element method software is used to solve a non-linear Poisson's equation. The numerical simulations allowed to model the optical response of ITO-In2O3 core-shell nanocrystals and can be effectively applied to different nanotopologies to support an enhanced design of nanomaterials with multispectral shielding capabilities

In situ characterization of the functional degradation of a [001] orientated Fe–Mn–Al–Ni single crystal under compression using acoustic emission measurements

Acoustic emission (AE) measurements were conducted in situ during cyclic compressive loading on an [ 00 1 over line ] orientated single crystal of Fe-Mn-Al-Ni shape memory alloy to study functional degradation of its superelastic response. The acoustic investigations were corroborated by optical microscopy, employing video imaging, and transmission electron microscopy. The analysis of acoustic emissions recorded during repeated loading and unloading sessions revealed two categories of AE signals that are differed by their characteristics in time and frequency domains. These two distinct types of AE signals were related to two underlying mechanisms: (i) the nucleation and reverse transformation of stress-induced (twinned) martensite, and (ii) the lateral growth and shrinkage of one dominant martensite variant and related dislocation activities, respectively. In addition, an asymmetry in the AE activity during forward and reverse transformation during mechanical loading and unloading was detected. In particular, an unexpected high AE activity was observed during the superelastic unloading of martensitic microstructure from the point of maximum load/strain. This effect was attributed to the reverse transformation of small, tiny areas of martensite as well as to unpinning and annihilation effects related to dislocations. (c) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved